« 返回题库列表500-220认证考试题库及练习试题,Cisco 500-220认证考试 | 思博网络
在思科领域实现成功的关键在于……
500-220在思博网络平台上,您可以通过参加我们的认证考试来获得相关证书。该考试包含全面的试题和学习资料。Engineering Cisco Meraki Solutions (ECMS 500-220)考试是专为评估考生对Cisco Meraki解决方案的掌握程度而设计的,考试时长为90分钟。考试内容涵盖云管理、设计、实施、监控以及故障排除等方面。我们的模拟测试可以帮助您更好地准备考试。
考试模拟题/练习资料这些历年真题和答案旨在帮助你掌握相关知识点,从而在备考过程中取得优异的成绩。请充分利用我们的资源吧。
在线历年真题、模拟考试以及考试模拟器,都能帮助您更好地进行考试练习。借助思博网络提供的考试资料与答案,您就能充分准备好应对500这个挑战了。
220考试自信地。
问题 #1
As a network administrator, which of the following protocols can I use for network device configuration?
A. SSHcorrect
B. NETCONFcorrect
C. LLDP
D. SNMPcorrect
问题 #2
A VRRP virtual router configuration VRID is 3 and the virtual IP address is 100.1.1.10, so what is the virtual MAC address?
A. O0-00-5E-00-01-64
B. 01-00-5E-00-01-03
C. 01-00-5E-00-01-54
D. 00-00-5E-00-01-03correct
问题 #3
Based on the information given in the figure, which of the following statements is correct?
A. Unable to determine the device type of R3
B. The device type of R3 must be Level-1-2correct
C. The device type of R3 must be Level-2
D. The device type of R3 must be Level-1
问题 #4
Which of the following descriptions about BGP/MPLS IP VPN routing interaction is wrong?
A. After receiving the VPNv4 route advertised by the ingress PE, the egress PE filters the VPNv4 routes according to the RT attribute carried by the route.correct
B. The egress PE can send IPv4 routes to the remote CE through BGP, IGP or static routes
C. The exchange between PE and CE is IPv4 routing information
D. The ingress PE converts the IPv4 routes received from the CE into VNPv4 routes, and saves them according to different VPP instances
问题 #5
Using BGP EVPN as the control plane of VXLAN can completely avoid traffic flooding in the VXLAN network, such as ARP broadcast packets.
问题 #6
A company's two-layer phase network architecture as shown in the figure, when the engineer is configured to find that the business between departments can not communicate, through the command to view the status of the equipment as follows, please determine the possible causes?
A. The BPDU interval between switches is not configured
B. The Transition VLAN mapping between the handover machines is not configured to be caused
C. The Revislon Level configuration is inconsistent between switches
D. Inconsistent Registry Name configuration between text exchange machines
问题 #7
BGP routing policies can control the publication and acceptance of routes
问题 #8
For telemetry data push, data can be transferred between devices and collectors using the TLS protocol. TLS must be configured for data encryption if data is pushed based on gRPC.
问题 #9
When the client calls the iMaster NCE-Campus login authentication RESTful interface, the method used is POST, and the request message body format is {"userName": "xxx", "password": "xxx"}
问题 #10
The switch can suppress traffic by suppressing traffic and extremely other failures can affect operations, which of the following traffic suppression configurations is the wrong configuration
A. [Quidway] wan 10 [Quidway-wan10] multicast-suppression 1000 [Quidway-van10] quitcorrect
B. [Qudway ineface gigabtethemnet /0'1[Quidway-GigabitEfthemetO0/O/1]multicast-suppression 80TQuidway-GigabitEthernet0/0/1]quit
C. Quidway inteface gigabiethenet ou0/1[Quidway-GigabtEthernet/0/1J,broadcast-suppression 80 IQuidway-GigabitEthernet//1]Jqut
D. [Quidway] icmp rate-limit enable [Quidway] icmp rate-limit total threshold 20
E. [Quidway ] wan 10 [Quidway-wani0] broadcast-suppression 1000 [Quidway-van10] quit
问题 #11
The switch SWA and SWB are connected together by 2 Ethernet links, where the switch SWA has the following interface configuration:
A. Without changing the current configuration, GigabitEthernet1/0/1 and GigabitEthernet1/0/2 can join the same aggregation group
B. Because of the different VLANs allowed, GigabitEthernet1/0/1 and GigabitEthernet1/0/2 cannot join the same aggregation group
C. After link clustering is configured on both SWA and SWB, if MSTP is enabled on the switches SWA and SWB Both GigabitEthernetl1/0/1 and GigabitEthernetl/O/2 are the forwarding status of MSTP
D. Only if the configuration of GigabitEthernet 1/0/2 is changed to match GigabitEthernet 1/0/1 can the two join the same aggregation group
问题 #12
Which of the following descriptions about the difference between SPFv2 and SPFv3 are correct?
A. Both SPFv2 and SPFv3 support interface authentication, and OSPFv3 authentication is still implemented based on the fields in the SPF packet header
B. SPFv3 is similar to SPFv2 and uses the multicast address as the destination address of SPF packetscorrect
C. SPEv2 and OSPFv3 have the same type of packets: Hello, ODD, LSR, LSU, LSAack, and their packet formats are the same
D. The protocol number of SPFv2 in the IPv4 header is 89, and the next header number of OSPFv3 in the IPv6 header is 89
问题 #13
To implement the traffic filtering function, you can use trapp-filter or MQC, which can be called in more views than traffic-filter
问题 #14
Which of the following statements is incorrect about BGP/MPLS IP VPN data forwarding?
A. A data packet always carries two labels when being transmitted on a BGP/MPLS IP VPN backbone network.
B. The outer label used to guide data forwarding can be distributed by LDcorrect
C. The inner label used to guide data forwarding is distributed by MP- BG
D. Packets sent by a PE to a CE are IPv4 packets.
问题 #15
Enterprises can access the Internet through dial-up connection, xDSL, xPON, etc.
问题 #16
What of the following actions can enable fast failure detection on multicast networks?
A. Shorten the Holdtime of Join/Prune messages
B. Reduce the interval at which the interface sends Hello messagescorrect
C. A PIM BFD session is established between neighbors
D. Reduce the interval between sending Join/Prune messages
问题 #17
In a scenario where a VXLAN tunnel is dynamically established through BGP EVPN, which of the following fields is not carried in BGP EVPN Type 2 routes?
A. L2VNI
B. L3VNIcorrect
C. IP Address
D. IP Prefix
问题 #18
If the Option field value in the 0SPFv3 Hello message issued by the router's GIgabit Ethermet0/0 interface is 0x000013, the following description is correct
A. The Gigabit/thernetO/0/0 interface of Router A adds IPv6 routing to computecorrect
B. Router A's Gigabit/thernetO/0/0 interface belongs to the NSSA zone
C. Router A supports AS-An External-LSA floodcorrect
D. Router A is an OSPFv3 device with forwarding capabilitycorrect
问题 #19
Which of the following descriptions about labels is wrong?
A. The LSP established by statically assigning labels can also be dynamically adjusted according to network topology changes without administrator intervention.correct
B. The principle to be followed when manually assigning labels is that the value of the outgoing label of the upstream node is the value of the incoming label of the downstream node.
C. LSP is divided into two types: static LSP and dynamic LS: Static LP is manually configured by the administrator, and dynamic LSP is dynamically established using label protocol.
D. Dynamic SP is dynamically established through label publishing protocols, such as MP-BGP, RSVP-TE, and LDP
问题 #20
Regarding the description of configuring the security level of the firewall security zone, which of the following statements is correct?
A. For the newly created security zone, the system default security level is 1.correct
B. The security level can only be set for customized security zones.
C. In the same system, two security zones are not allowed to configure the same security level.
D. Security level - once set, no changes are allowed
问题 #21
The enterprise WAN provides interconnection between enterprise headquarters and branches, between enterprises and clouds, and between clouds.
问题 #22
As shown in the figure, which of the following options satisfies two routers to establish an ISIS neighbor?( Single choice questions).
A. Both routers are of The Level-1 type. B. Both routers remain of the default type.
C. One of the two routers can be of the Level-1-2 type and the other of the Leve1-1 type. D. The ISIS process numbers of the two routers must be consistent.
问题 #23
Which of the following is the meaning of the ipv6 enable topology ipv6 command in IS-IS protocol view?
A. IPv4 and IPv6 use the same topology for SPF calculation
B. SPF calculation is performed separately in IPv4 and IPv6 topologies.correct
C. SPF calculation for IPv6 routing is not supported
D. Does not have any meaning
问题 #24
All routers in a network enable the SR-MPLS function based on OSPF. The SRGB of each router is as shown in the figure. By default, when R3 forwards a packet with the destination address 10.0.4.4, the SRGB carried is as shown in the figure. It shows that by default, when R3 forwards a packet with the destination address 10.0.4.4, which of the following MPLS labels is carried?
A. 50100correct
B. 40100
C. 100
D. 3
问题 #25
The Accept-Language ?eld in the HTTP request header indicates the languages preferred by a client as a response to the request.
问题 #26
In RSTP, which port provides a backup path to reach the root node of the spanning tree? What state is the port in?
A. Root Port and Listening Status
B. Alternate Port and Forwarding Status
C. Alternate Port and Learning Status
D. Designated port and Listening status
E. Alternate port and Discarding statuscorrect
问题 #27
After BGP introduces routes for other protocols, the next hop in the BGP routing table is consistent with the next hop of the introduced routing protocol
问题 #28
A switch joins a running stacking system after powering up, a behavior known as heap overlay.
问题 #29
For Layer 2 VPN technology, the following statement is correct? Multi-select
A. VPLS is a widely used technology in the live network, which can provide transparent transmission of three-layer messages and achieve multi-point access.correct
B. The VPLS configuration is complex and the Layer 2 network transmits BUM packets.correct
C. BGPEVPN supports features such as tenant isolation, Multi-homing, and broadcast suppression.correct
D. BGPEVPN addresses mac address drift and multi-tenancy that VPLS cannot support.