« 返回题库列表最新的 CCNA 200-301 练习考试及题库，2026年适用。这是思科认证网络助理的考试内容。
通过思博网络提供的先进练习测试以及2026年的考试题库，您可以有效地准备最新的200-301 CCNA考试。 我们的平台提供了丰富的资源，包括各种考试资料以及示例题目。这些资源都是经过精心挑选的，旨在帮助学员提升理论知识和实践技能。 请深入探索我们丰富的考试题库，以巩固你的知识储备，确保你能够做好充分的准备。 参加模拟考试，以模拟真实的考试情境，从而提升你的应试能力。 无论您是在寻找考试答案，还是想要免费测试样本，思博网络都能为您的备考过程提供必要的支持。 通过我们的在线历年真题和模拟考试系统，你将获得宝贵的经验和信心，从而在CCNA认证考试中取得优异的成绩。 请信任思博网络，它为您提供实现认证目标所需的工具与帮助。
问题 #1
In the network shown in the figure, R1 is configured with route penetration, then R1 sends the LSP of Level1-2 to R3, so that R3 can learn the entire network route.
问题 #2
To prevent inter - area routing loops, OSPF does not allow advertising routing information between two non - backbone areas and allows sing routing information only within an area or between the backbone area and a non - backbone are a. Therefore, each ABR must be connected to the backbone area.
问题 #3
Regarding the default routes of each protocol, which of the following description is wrong?
A. BGP can deliver default routes
B. ISIS can issue default routes
C. OSPF cannot deliver the default routecorrect
D. Static default routing can be configured
问题 #4
When performing source NAT configuration and having no-pat configuration parameters, which of the following statements is correct?
A. Only the destination IP address is translated
B. Simultaneous source IP address and source port translation
C. Only source IP address translation is performedcorrect
D. Perform destination IP address and destination port translation
问题 #5
Which of the following statements regarding OSPF neighbor relationship and adjacency is true?
A. Not all neighbors can establish adjacencies.
B. Neighbor relationships are selected from adjacencies to exchange routing information.
C. OSPF routers must establish an adjacency before exchanging information.
D. Adjacencies are maintained using OSPF DD packet
问题 #6
Among the matters needing attention in configuring the Stub area, the correct description is:
A. The virtual connection can pass through the stub area
B. If an area is configured as a Stub area, all routers in the area must be configured with Stub area attributescorrect
C. The backbone area can be configured as a stub area
D. ASBR can exist in the Stub area
问题 #7
Which BGP route will send BGP neighbors without BGP path load sharing enabled?
A. All BGP routes learned from all neighbors
B. Only the best route preferred by BGPcorrect
C. Only routes learned from IBGP
D. Only routes learned from EBGP
问题 #8
Among the routing policy tools commonly used in BGP, the one that can be used to match a specific AS_path is:
A. filter-policy
B. ip-prefix
C. ip as-path-filercorrect
D. community-filter
问题 #9
The four routers run IS-S and have established adjacency. The area numbers and router levels are marked in the figure. Which of the following statements is correct?
A. Both R2 and R3 will generate Level-1 LSPs with ATT set.correct
B. R1 does not have the LSP generated by R4, so R1 can only communicate with R4 through the default route.
C. Both R2 and R3 will generate LSPs of Level 1-2 with ATT set.
D. R2 and R3 learn default routes from each other, and a routing loop occurs in the network.
问题 #10
Regarding the description of the summary automatic command and BGP aggregation, the error is:
A. This command is used to implement automatic aggregation, and its priority is higher than manual aggregationcorrect
B. After configuring this command, BGP will aggregate routes according to natural network segments
C. This command is used to enable automatic aggregation of locally imported routes
D. After configuring this command, BGP only sends the aggregated route to the peer
问题 #11
Regarding the description of network address port translation (NAP) and network address translation only (No-PAT), which of the following statements is correct?
A. No-PAT supports protocol address translation at the network layercorrect
B. No-PAT only supports protocol port translation at the transport layer
C. After NATP conversion, for external network users, all packets will only come from the same IP address
D. NAPT only supports protocol address translation at the network layer
问题 #12
Which of the following description of OSPF neighbor relationship and adjacency relationship is correct?
A. The adjacency relationship is maintained by OSPF DD packets
B. OSPF routers must establish an adjacency before exchanging Hello packets
C. The neighbor relationship is selected from the adjacency relationship and formed to exchange routing information
D. Not all neighbor relationships can be adjacenciescorrect
问题 #13
As shown in the figure, the stateful inspection firewall will forward the packet because the packet conforms to the firewall session state.
问题 #14
The configuration command for linkage between VRRP and BFD is:
A. vrrp vrid 1 track bfd-session session-name 1 reduced 100correct
B. bfd-session vrrp vrid 1 track session-name 1 reduced 100
C. vrrp vrid 1 track bfd-session-name 1 reduced 100
D. track vrrp vrid 1 bfd-session session-name 1 reduced 100
问题 #15
Which of the following description about the prefix list is wrong?
A. The prefix list can match the prefix number and prefix length
B. The prefix list can be used for packet filteringcorrect
C. The prefix list can be used to filter IP prefixes
D. The prefix list has a stronger matching function for routing masks than the access control list
问题 #16
Which of the following descriptions about OSPF default routing is wrong?
A. The OSPF default route can be issued by the Area Border Router (ABR) to issue Type 3 default LSAs to guide routers in the area to forward packets between areas
B. When the router has no exact matching route, it can forward the message through the default route
C. Due to the hierarchical management of OSPF routes, the priority of class 5 and class 7 default routes is higher than that of class 3 default routes
D. Autonomous System Boundary Router (ASBR) publishes default LSA of type 5 or default LSA of type 7, which is used to guide routes in the autonomous system (AS) to access the outside of the autonomous systemcorrect
问题 #17
Which of the following PIM protocol packets have unicast destination addresses.
A. Register Stop
B. Bootstrap
C. Graftcorrect
D. Assert
问题 #18
Which of the following tools is used to filter routing information and set routing attributes for filtered routing information?
A. route-policycorrect
B. as-path-filter
C. policy-based-route
D. IP-prefix
问题 #19
The default priority of the VRRP device in the backup group is:
A. 0
B. 200
C. 150
D. 100correct
问题 #20
On the OSPF network shown in the figure, an adjacency has been established between R1 and R2. An engineer configures the commands in the figure on R2. In this case, which of the following routing entries may exist in the routing table of R2?
A. 10.1.4.0/24
B. 10.1.3.0/24
C. 10.1.2.0/24
D. 10.1.1.0/24
问题 #21
Which of the following statement about OSPF neighbor information is wrong?
A. The router id of the neighbor is 2.2.2.2
B. This router is the Mastercorrect
C. The address of DR is 10.1.1.1
D. The router id of this router is 1.1.1.1
问题 #22
Which function does the switch control plane not include?
A. Business processing
B. Routing operation
C. System loadingcorrect
D. Traffic Statistics
问题 #23
Which of the following descriptions about setting Community through routing policies to affect routing selection is wrong?
A. It can be indirectly affected. By setting the Community attribute of the route, the route can be classified, and then set different route selection-related attributes according to the category, such as Local_Pre, MED, etc., to achieve the purpose of affecting route selectioncorrect
B. It cannot be affected, because the Community attribute of the route is a non-transitional attribute and cannot be passed between routers
C. It can be affected indirectly. By setting the Community attribute of the route, the route can be classified, and then different attributes related to route selection can be set according to the category. These attributes only include Loacal_Pre and MED, so as to achieve the purpose of affecting route selection
D. After the router receives the routing update whose Commmity attribute is No_ Advertise, it will not advertise it outside the local A
问题 #24
IGMPV3 not only supports IGMPv1 General Query and IGMPv2 Group-Specific Query, and also IGMPv3 Source/Group-Specific Query.
问题 #25
What are the key components of building an IP wide-area bearer network solution together with Huawei NetEngine intelligent routers?
A. iMaster NCE-Fabric
B. iMaster NCE-IP
C. iMaster NCE-Campus
D. iMaster NCE-WANcorrect
问题 #26
The traffic limiting policy feature only supports the number of connections initiated by the specified IP or the number of connections received.
问题 #27
Regarding the description of IGMP Snooping-working mechanism, which is the correct?
A. The layer 2 switch establishes and maintains the PIM routing table on the layer 2 by continuously monitoring IGMP messages.
B. When IGMP Snooping is not running, the multicast message will be broadcast on the second layer. After running IGMP Snooping, the message will no longer be broadcast on the second layer, but will be multicast on the second layer.correct
C. If the host sends an IGMP leave message, the switch will add the host to the corresponding multicast table.
D. If the host sends an IGMP host report message, the switch will delete the multicast entry corresponding to the hos.t
问题 #28
Which of the following statements regarding OSPF AS-External-LSA are true? (Choose all that apply.)
A. Net mask is set to all 0s.
B. Advertising Router is set as the router ID of an ASBR.
C. Link State ID and Advertising Router can uniquely identify an AS-External-LSA.
D. Link State ID is set as an address on the destination network segment.
问题 #29
Which of the following statements regarding DR/BDR are false? (Choose all that apply.)
A. In a broadcast network, DR and BDR must be elected. A broadcast network without a DR or BDR cannot operate normally.
B. All DR others establish neighbor relationships with DR and BDR only.
C. DR others listen on the multicast address 224.0.0.5.
D. DR others listen on the network address 224.0.0.6.
闽公网安备 35012102500533号
|
闽ICP备18010967号-7