首页 > 题库 > 300-810

拥有CCNP级别的300-810考试证书，同时拥有相关的历年真题与学习资料。此外，还具备Cisco Collaboration领域的300-810 CLICA和SPOTO相关认证。

通过思博网络提供的全面历年真题和学习资料，轻松掌握Cisco Collaboration领域的CCNP 300-810认证考试。这项为期90分钟的考试是CCNP Collaboration认证的重要组成部分。该考试旨在评估考生对以下协作应用程序的理解程度：单点登录、Cisco Unified IM和Presence、Cisco Unity Connection、Cisco Unity Express以及相关的应用程序客户端。 “实施思科协作应用”这门课程旨在帮助学员更好地准备考试，涵盖了取得成功所需的关键内容。您可以参考我们的模拟测试、考试题库以及相关学习资料，从而更好地准备CCNP 300-810考试，并在考试中展现出出色的技能水平。利用我们的模拟考试系统和在线试题来巩固您的知识，从而在认证过程中取得优异的成绩。

问题 #1

Which method changes the forwarding decision that a router makes without first changing the routing table or influencing the IP data plane?

A. nonbroadcast multiaccess

B. packet switching

C. policy-based routingD. forwarding information base

正确答案：C

问题 #2

You have recently joined a company as the network administrator. You have been asked to complete the configuration on the border routers for an automatic 6-to- 4 tunnel between several IPv6 network domains. The commands that are currently configured on the routers are as follows: ipv6 route tunnel interface tunnel ipv6 address tunnel source Which of the following additional commands is required to complete the configuration of automatic 6-to-4 tunnel on the border routers?

A. tunnel mode ipv6ip

B. tunnel mode ipv6ip 6to4

C. tunnel mode ipv6ip auto-tunnel

D. tunnel mode ipv6ip isatap

正确答案：B

问题 #3

Automatic 6-to-4 tunnels exist between dual-stack routers (A, B, and C). One router has the IPv6 address, 2002:D030:6BC0:173C::26:37D0/48 Which of the following addresses is the IPv4 address of the router with the IPv6 address 2002:D030:6BC0:173C::26:37D0/48?

A. 10.176.15.131

B. 10.200.80.67

C. 208.48.107.192

D. 208.138.16.110

正确答案：C

问题 #4

After applying IPsec, the engineer observed that the DMVPN tunnel went down, and both spoke-to-spoke and hub were not establishing. Which two actions resolve the issue? (Choose two.)A. Change the mode from mode tunnel to mode transport on R3.

B. Remove the crypto isakmp key cisco address 10.1.1.1 on R2 and R3.

C. Configure the crypto isakmp key cisco address 192.1.1.1 on R2 and R3.

D. Configure the crypto isakmp key cisco address 0.0.0.0 on R2 and R3.

E. Change the mode from mode transport to mode tunnel on R2.

正确答案：B

问题 #5

When provisioning a device in Cisco DNA Center, the engineer sees the error message “Cannot select the device. Not compatible with template”. What is the reason for the error?

A. The template has an incorrect configuration.

B. The software version of the template is different from the software version of the device.

C. The changes to the template were not committed.

D. The tag that was used to filter the templates does not match the device tag.

正确答案：B

问题 #6

Which configuration denies Telnet traffic to router 2 from 198A:0:200C::1/64? A.B.

正确答案：D

问题 #7

An engineer is trying to generate a summary route in OSPF for network 10.0.0.0/8, but the summary route does not show up in the routing table. Why is the summary route missing?

A. The summary-address command is used only for summarizing prefixes between areas.

B. The summary route is visible only in the OSPF database, not in the routing table.

C. There is no route for a subnet inside 10.0.0.0/8, so the summary route is not generated.

D. The summary route is not visible on this router, but it is visible on other OSPF routers in the same area.

正确答案：C

问题 #8

Which of the following statements are TRUE about manually configured IPV4-to-IP6 tunnels and GRE tunnels? (Choose two.)

A. Manually configured tunnels use the tunnel mode ipv6ip command, while GRE tunnels use the tunnel mode gre ip command.

B. Manually configured tunnels support IPv6 IGPs, while GRE tunnels do not.

C. Manually configured tunnels block IPv6 multicasts, while GRE forwards them.

D. Manually configured tunnels do not support multiple passenger protocols, while GRE tunnels support them.

正确答案：AD

问题 #9

An automatic IPv4-compatible IPv6 tunnel exists between two IPv6 networks. The two IPv6 networks belong to different BGP autonomous systems (AS). The tunnel source has the IPv4 address 172.168.111.65/24 and the tunnel destination has the IPv4 address 172.168.222.80/24. Which of the following statements is TRUE about the tunnel source and tunnel destination IPv6 addresses? (Choose two.)

A. the IPv6 address of the tunnel source is 172.168.111.65::

B. the IPv6 address of the tunnel source is ::172.168.111.65

C. the IPv6 address of the tunnel destination is 172.168.222.80::

D. the IPv6 address of the tunnel destination is ::172.168.222.80

正确答案：BD

问题 #10

Which statement about R1 is true?

A. OSPF redistributes RIP routes only if they have a tag of one.

B. RIP learned routes are distributed to OSPF with a tag value of one.

C. R1 adds one to the metric for RIP learned routes before redistributing to OSPF.

D. RIP routes are redistributed to OSPF without any changes.

正确答案：D

问题 #11

R2 is a route reflector, and R1 and R3 are route reflector clients. The route reflector learns the route to 172.16.25.0/24 from R1, but it does not advertise to R3. What is the reason the route is not advertised?A. R2 does not have a route to the next hop, so R2 does not advertise the prefix to other clients.

B. Route reflector setup requires full IBGP mesh between the routers.

C. In route reflector setup, only classful prefixes are advertised to other clients.

D. In route reflector setups, prefixes are not advertised from one client to another.

正确答案：C

问题 #12

R2 has a locally originated prefix 192.168.130.0/24 and has these configurations: What is the result when the route-map OUT command is applied toward an eBGP neighbor R1 (1.1.1.1) by using the neighbor 1.1.1.1 route-map OUT out command?

A. R1 sees 192.168.130.0/24 as two AS hops away instead of one AS hop away.

B. R1 does not accept any routes other than 192.168.130.0/24

C. R1 does not forward traffic that is destined for 192.168.30.0/24

D. Network 192.168.130.0/24 is not allowed in the R1 table

正确答案：A

问题 #13

Which subnet is redistributed from EIGRP to OSPF routing protocols?

A. 10.2.2.0/24

B. 10.1.4.0/26C. 10.1.2.0/24

D. 10.2.3.0/26

正确答案：D

问题 #14

Which of the following IPv6/IPv4 interoperability techniques routes both IP versions simultaneously?

A. NAT-PT

B. Dual stack

C. 6to4 tunnels

D. Teredo

正确答案：B

问题 #15

An engineer is trying to configure local authentication on the console line, but the device is trying to authenticate using TACACS+. Which action produces the desired configuration?A. Add the aaa authentication login default none command to the global configuration.

B. Replace the capital “C” with a lowercase “c” in the aaa authentication login Console local command.

C. Add the aaa authentication login default group tacacs+ local-case command to the global configuration.

D. Add the login authentication Console command to the line configuration

正确答案：B

问题 #16

Which of the following statements represent characteristics of an automatic 6to4 tunnel through an IPv4 network? (Choose all that apply.)

A. There is a NAT-PT router on either end of the tunnel.

B. There is a dual stack router on either end of the tunnel.

C. Each 6to4 site will have a /48 prefix.

D. Each 6to4 site will have a /16 prefix.

E. The IPv4 addresses of the edge routers are part of the site prefix.

F. The IPv6 addresses of the sending and receiving IPv6 hosts are part of the site prefix.

正确答案：BCE

问题 #17

During troubleshooting it was discovered that the device is not reachable using a secure web browser. What is needed to fix the problem?

A. permit tcp port 443

B. permit udp port 465

C. permit tcp port 465

D. permit tcp port 22

正确答案：B

问题 #18

An engineer configured the wrong default gateway for the Cisco DNA Center enterprise interface during the install. Which command must the engineer run to correct the configuration?

A. sudo maglev-config update

B. sudo maglev install config update

C. sudo maglev reinstallD. sudo update config install

正确答案：A

问题 #19

What does the imp-null tag represent in the MPLS VPN cloud?A. Pop the label

B. Impose the label

C. Include the EXP bit

D. Exclude the EXP bit

正确答案：A

问题 #20

An engineer configures a static route on a router, but when the engineer checks the route to the destination, a different next hop is chosen. What is the reason for this?

A. Dynamic routing protocols always have priority over static routes.B. The metric of the OSPF route is lower than the metric of the static route.

C. The configured AD for the static route is higher than the AD of OSPF.

D. The syntax of the static route is not valid, so the route is not considered.

正确答案：B

问题 #21

You have implemented IPv6 automatic 6-to-4 tunneling between three IPv6 subnets as shown in the network exhibit. (Click the Exhibit(s) button.) You have used the following commands to implement the automatic 6-to-4 tunnel: Your supervisor has assigned the task of verifying the automatic 6-to-4 tunnel to one of your colleagues. Your colleague runs the show running-config command and finds that incorrect IPv6 addresses have been assigned to the tunnel interfaces of the routers. Which of the following IPv6 ad

A. 2002::c0a8:2d01/64 to the Fa0/1 interface of rtrA

B. 2002:c0a8:4b01::1/64 to the Fa0/1 interface of rtrB

C. 2002:c0a8:7d01::1/64 to the Fa0/1 interface of rtrC

D. 2002:c0a8:4b01::1/64 to the Fa0/1 interface of rtrA

正确答案：BC

查看更多题库 »