« 返回题库列表《Cisco 500-220认证考试辅导资料及试题》，包含500-220考试的详细内容。
为Cisco的考试做好有效的准备吧。
500-220在思博网络平台上，您可以通过使用我们提供的各种历年真题和学习资料来参加认证考试。ECMS 500-
220考试该考试是为 Cisco Meraki解决方案专家设计的，旨在评估您设计和实施Meraki解决方案的能力。考试内容涵盖云管理、设计、实施、监控以及故障排除等方面。这个为期90分钟的考试需要考生对Cisco Meraki技术有深入的了解。我们的模拟测试可以帮助您更好地准备这次考试。
丢弃/删除这些带有答案的历年真题，为你的备考提供了坚实的基础。你可以免费尝试一些模拟题，以评估自己的准备情况。利用我们的考试模拟器进行真实的考试练习吧。有了思博网络提供的考试资料以及答案，你就能轻松掌握500-220考试的要点了。
问题 #1
A customer is running a guest WLAN with a foreign/export-anchor setup. There is one anchor WLC in the US and two in Europe. Anchor WLC priorities are used to prefer local anchors. During a routine network audit, it is discovered that a large number of guest client sessions in the US are anchored to the WLCs in Europe. Which reason explains this behavior?
A. The foreign WLC failed and recovered.
B. The US anchor WLC failed and recovered.
C. The US anchor WLC is anchored to itself with a priority value of zero.
D. The anchor WLC is in the same mobility group.
问题 #2
A client roams between two APs that are registered to two different controllers, where each controller has an interface in the client subnet. Both controllers are running AireOS. Which scenario explains the client roaming behavior?
A. Controllers exchange mobility control messages (over UDP port 16666) and the client database entry is moved from the original controller to the new controller.
B. Controllers do not exchange mobility control messages (over UDP port 16666) and the client database, entry is not moved from the original controller to the new conrtoller.
C. Controllers exchange mobility control messages (over UDP port 16666) and a new client session is started with the new controller.
D. Controllers exchange mobility control messages (over UDP port 16666) and the client database entry is tunneled from the original controller to the new controller.
问题 #3
When conducting a site survey for real-time traffic over wireless, which two design capabilities of smartphones and tablets must be considered? (Choose two.)
A. no support for 802.11ac
B. higher data rates than laptops
C. fewer antennas than laptops
D. no support for 802.11r
E. lower data rates than laptops
问题 #4
An engineer must configure the virtual IP address on multiple controllers in a mobility group. Which rule must the engineer follow to ensure proper roaming?
A. Ensure that the DNS entry is tied to the virtual IP address of the WLC.
B. Use a unique IP address for each WLC.
C. Ensure that the DNS Host Name field is defined.
D. Use the same IP address for each WLC.
问题 #5
A company has 10 access point licenses available on their backup Cisco WLC and their primary Cisco WLC is at full capacity, 5 access points are set to high failover priority and 7 access points are set to critical failover priority. During a failure, not all critical access points failed over to the backup Cisco WLC. Which configuration is the cause of this issue?
A. The high priority access point is oversubscribed.
B. network ap-priority is set to enable.
C. The critical priority access point count is oversubscribed.
D. network ap-priority is set to disable.
问题 #6
A customer is concerned about mesh backhaul link security. Which level of ecnryption does the backhaul link use?
A. hash
B. AES
C. WEP
D. 3DES
问题 #7
A technician connects a Cisco Aironet 3700 Series access point to a switch and realizes that the AP is coming up with 3x3 MIMO. Which reason explains this behavior?
A. A redundant power supply is unavailable on the switch.
B. The switch is 802.3af capable.
C. The AP is getting power from a power injector.
D. The switch is PoE+ capable.
问题 #8
Which statement about AP failover priority for access points when configured with priority 1 or 4 is true?
A. When configured with priority 1, the access point is assigned with the highest priority level and it is marked as critical. This access point fails over before other access points with the lower priority when there is primary controller failure.
B. When configured with priority 4, the access point is assigned with the highest priority level and it is marked as critical. This access point fails over before other access points with the lower priority when there is primary controller failure.
C. When configured with priority 4, the access point is assigned with the lowest priority level and it is marked as low. This access point fails over after other access points with the higher priority when there is primary controller failure.
D. When configured with priority 1, the access point is assigned with the medium priority level and it is marked as medium. This access point fails over after other access points with the higher priority when there is primary controller failure.
问题 #9
An engineer has configured guest anchoring for a newly created SSD however, the mobility tunnels are not up, and EPING is failing from the foreign WLC to the anchor WLC. Which traffic flow must be allowed at the firewall to enable the communication?
A. UDP port 16666
B. IP protocol 97
C. UDP port 97
D. TCP port 97
问题 #10
An engineer must create data-link redundancy for the company’s Cisco Wireless LAN Controller. The engineer has decided to configure LAG-based redundancy instead of port-based redundancy. Which three features of LAG-based redundancy influenced this decision? (Choose three.)
A. Packets are always sent out on the same port they are received on.
B. All interface traffic passes as long as one port is up.
C. The same port has multiple untagged dynamics interfaces.
D. Interface connection to two separate nonstacked switches is available.
E. Full bandwidth of all links is available.
F. Ports are grouped into multiple LAGs.
问题 #11
A customer has determined that aesthetics is a primary concern for their upcoming guest deployment. Which design consideration can be leveraged to address this concern?
A. Paint the access point to cover the LED from being noticeable.
B. Use enclosures to hide the wireless infrastructure in the surrounding environment.
C. Use AIR-AP-BRACKET-1 to allow for greater mounting locations
D. Deploy environmentally friendly cabling components to blend into the environment.
问题 #12
A wireless engineer is performing a post verification of a wireless network. Which two metrics does the engineer verify to ensure that the wireless network can support voice services? (Choose two.)
A. The coverage area must have a noise floor that does not exceed -87 dBm.
B. The client device must have at least an -67 dBm RSSI.
C. The rate of retransmitted packets must be 15 percent or below.
D. The rate of retransmitted packets must be 20 percent or below.
E. The client device must have at least an -65 dBm RSSI.
问题 #13
Which statement about the 9800 Series Wireless Controller mobility tunnel on a Cisco Catalyst 9800 controller is true?
A. It is an IPsec tunnel with control path only.
B. It is a CAPWAP tunnel with data path only.
C. It is a CAPWAP tunnel with control path and data path.
D. It is an IPsec tunnel with control path and data path.
问题 #14
An engineer must create data link redundancy for the company’s Cisco Wireless LAN controller. The engineer has decided to configure LAG-based redundancy instead of port-based redundancy. Which three features of LAG-based redundancy influenced this decision? (Choose three.)
A. Packets are always sent out on the same port they are received on.
B. All interface traffic passes as long as one port is up.
C. The same port has multiple untagged dynamic interfaces.
D. Interface connection to two separate nonstacked switches is available.
E. Full bandwidth of all links is available.
F. Ports are grouped into multiple LAGs.
问题 #15
Which two statements about Cisco Prime Infrastructure are true? (Choose two.)
A. It presents the recommended number of APs for the selected coverage area based on the selections made.
B. Planning mode requires a special license in Cisco Prime Infrastructure.
C. It shows the map editor feature in Cisco Prime Infrastructure.
D. Controllers must be synchronized with Cisco Prime Infrastructure for planning mode to work.
E. It shows the planning mode feature in Cisco Prime Infrastructure.
闽公网安备 35012102500533号
|
闽ICP备18010967号-7