首页 > 题库 > 350-401

高级CCNP 350-401考试练习试题与真实考试模拟题，适用于Cisco企业网络核心考试 | 思博网络

通过我们的高级模拟测试以及真实的考试模拟，为 CCNP 350-401 考试做好充分准备。这项考试属于 CCNP 和 CCIE 企业认证的一部分。它旨在评估考生在实施核心企业网络技术方面的能力，这些技术包括双栈架构（IPv4 和 IPv6）、虚拟化、基础设施管理、网络保障、安全以及自动化等方面。我们的考试资料包括模拟试题、样题以及模拟考试，这些都有助于确保考生能够做好全面的备考准备。您可以免费进行测试，以加强自己的考试练习。同时，还可以利用我们的考试模拟器和在线历年真题来进行有效的备考。凭借我们的学习资源和真实的模拟练习，你将能够充分准备，从而在Cisco企业网络核心考试中获得优异的成绩。

问题 #1

The HSRP configuration in the exhibit fails to function. Which action resolves this issue?

A. Enable IP redirects.

B. Set the MTU to 1500 bytes.

C. Configure HSRP version 2.

D. Configure the same HSRP group on both devices.

正确答案：A

问题 #2

After upgrading a client’s fabric interconnect to the latest version, an engineer discovers that the appliance has lost its entire configuration. Which two locations should an engineer check to confirm that the appliance had backed up the configuration prior to the upgrade in order to retrieve the lost configuration? (Choose two.)

A. Equipment FSM page, InternalBackup stage

B. Service profiles page, InternalBackup stage

C. Admin page, PollInternalBackup stage

D. Equipment FSM page, PollInternalBackup stage

E. Admin page, InternalBackup stage.

正确答案：AC

问题 #3

The EEM script overrides all events in the system policy. What should be added to the script to resolve the issue?

A. event statement

B. environment variable

C. event-default action statement

D. configure terminal action

正确答案：C

问题 #4

A network administrator attempts to install an application in the Cisco NX-OS Guest shell and receives an error that there is not enough space on the disk. Which command must the administrator run to increase the disk space available in the Guest shell?

A. guestshell growdisk rootfs [size-in-MB]

B. guestshell pvextend rootfs [size-in-MB]

C. guestshell resize rootfs [size-in-MB]

D. guestshell resize2fs rootfs [size-in-MB]

正确答案：A

问题 #5

An engineer is troubleshooting a fabric discovery failure. Which two requirements must an engineer verify about switch connectivity to solve the problem? (Choose two.)

A. A Cisco APIC must be attached to a spine node only.

B. A Cisco APIC must be attached to leaf nodes.

C. Spine nodes must connect to other spine nodes.

D. A Cisco APIC must be dual-attached to two separate spine nodes.

E. Leaf nodes must connect to spine nodes only.

正确答案：B

问题 #6

An engineer is troubleshooting a packet flow from an access leaf to spine. Which EVPN routes are expected on this connection?

A. EVPN Type 1-5

B. EVPN Type 0,9,15

C. EVPN Type 9-15

D. EVPN Type 0,16

正确答案：AC

问题 #7

An engineer is investigating a role mapping issue on a switch. The users report that they cannot view the IP addresses under the tenant “corp”. Which action resolves the issue?

A. Add the users to the RADIUS server.

B. Update the UNIX ID.

C. Configure the correct secret password between the APIC and the RADIUS server.

D. Add the updated avpair to include/corp/admin/

正确答案：A

问题 #8

An engineer discovers that an NPV/NPIV uplink experiences a heavy load and plans to add more uplinks. Which statement about what occurs when the new uplinks are added is true?

A. Only new connections use the new uplinks automatically.

B. Paths must be defined before new connections can use the new uplinks.

C. All connections must be reset before the new uplinks can be used.

D. New and existing connections use the new uplinks automatically.

正确答案：D

问题 #9

A mission-critical server is connected to site

A. Connectivity to this server is lost from site B because the MAC route is missing in the OTV VDC of the Nexus 7000 in site B due to MAC aging. Which action allows the flooding of the unknown unicast MAC on the Nexus 7000 in the OTV VDC?

A. Use route-map to advertise this MAC statically and redistribute with ISIS.

B. Unknown unicast flooding is not allowed.

C. Use the otv flood mac <> command to selectively flood traffic for a given MAC.

D. Use the otv isis bfd <> command to configure BFD protocol.

正确答案：B

问题 #10

The Cisco Nexus switch is connected to a peer switch that is not running Cisco NX-OS. The switches are connected using port channel and are experiencing packet loss. Which action should be performed on the Cisco Nexus switch ports to resolve this issue?

A. Turn on lacp suspend-individual.

B. Turn on lacp graceful-convergence.

C. Turn off lacp graceful-convergence.

D. Turn off lacp suspend-individual.

正确答案：C

问题 #11

A switch is being downgraded to an earlier release because of a problem with the current release. After the switch is downgraded, it can no longer forward traffic. Which action resolves the issue?

A. Enable ISSD after the downgrade is complete.

B. Roll back to the original image.

C. Reload the switch.

D. Shut and no shut the interfaces to the FEX.

正确答案：B

查看更多题库 »