首页 > 题库 > 350-701

高级CCNP 350-701考试练习与真实考试模拟题，Cisco Security 350-701考试——SCOR | 思博网络模式

通过我们的高级模拟测试以及真实的考试模拟，为在CCNP 350-701考试中取得成功做好准备。 Cisco Security Core SCOR 350-701考试是CCNP和CCIE Security认证的一部分。该考试旨在评估考生在实施和操作核心安全技术方面的能力。这些包括网络安全、云安全、内容安全、终端防护与检测、安全的网络访问方式、监控能力以及法规的强制执行等方面。我们的考试备考资源包括练习测试、模拟试题、样题以及模拟考试，这些资源有助于提升您的理解能力和备考效果。您可以访问相关的考试资料及答案，以便进行全面的备考。同时，可以使用我们的模拟考试系统来模拟真实的考试环境，从而确保您能够充分准备好在Cisco Security 350-701考试中取得优异的成绩。

问题 #1

After troubleshooting an OSPF adjacency issue, routers 1, 2, and 3 have formed OSPF neighbor relationships. Which statement about the configuration is true?

A. Router 2 receives a Type 5 LSAs from router 1 for its connected subnets

B. Router 2 uses router 3 as the next hop for 192.168.0.0/24

C. Router 2 uses router 1 as the next hop for 192.168.0.0/24

D. Router 2 receives a Type 7 LSAs from router 3 for its connected subnets

正确答案：A

问题 #2

R1 is directly connected to R2 and R3. R1 is in BGP AS 123, R2 is in BGP AS 2, and R3 is in BGP AS 3. Assume that there is no connectivity issue between R1, R2 and R1, R3. Which result between BGP peers R1, R2 and R1, R3 is true?

A. The BGP session does not come up between R1 and R2 and between R1 and R3.

B. The BGP session comes up between R1 and R2 and between R1 and R3.

C. The BGP session comes up between R1 and R3, but not between R1 and R2.

D. The BGP session comes up between R1 and R2, but not between R1 and R3.

正确答案：C

问题 #3

Refer to the exhibit. Routers R1, R2, R3, and R4 have been configured to run OSPF, and router R5 is running EIGRP. Trafficfrom R1 to R5 is expected to pass via R4, but OSPF routing has calculated the best path R3. Which action corrects theproblem?

A. Reconfigure R1 in Area 0

B. Configure R3 to use metric-type 1 with a higher metric than R4

C. Configure R1 with a static route to the R5 networks and set R5 as the next hop

D. Change the metric-type value on R3 to 2

正确答案：D

问题 #4

Refer to the exhibit. A network operator must inject a Level 1 route from XR2 (10.16.16.0/24) into the ISIS topology. Whichconfiguration allows the injection in a way that XR3 and XR1 have a valid and working route for 10.16.16.0/24?

A. Option A

B. Option B

C. Option C

D. Option D

正确答案：C

问题 #5

Router 1 is connected to router 2 on interface TenGigE0/1. Which interface provides the alternate path to 172.16.200.9/32 when the link between router 1 and router 2 goes down?

A. TenGigE0/1 interface provides the alternate path

B. A backup path must be statically installed

C. TenGigE0/2 interface provides the alternate path

D. A primary path must be manually installed

正确答案：B

问题 #6

Refer to the exhibit. Refer to the exhibit. Unified MPLS is implemented on this network to provide end-to-end services A network engineer noticed that R3 is failing to receive labels from R1 However, R2 is receiving labels from R1 R3 can ping R1 normally Which action resolves the issue?

A. Add the cdp run command to the link configuration between R1 and R3.

B. Add the send-label keyword in the R1 neighbor statement for R3.

C. Configure R1 to run Unified MPLS on both interfaces.

D. Disable mpls Ip on the link between R1 and R3.

正确答案：B

问题 #7

Refer to the exhibit. IS-IS is the routing protocol on the network. After the team noticed excessive CPU usage on all routers, particularly routers R2 and R6, they configured route summarization on all routers. However, a network engineer noticed that summary routes and more specific routes are present in the routing table on R1. Which action must the team take so that R1 receives only the summary routes?

A. Configure R2 and R4 to perform summarization for Level 1 routers.

B. Configure R3 to perform summarization for Level 1 routers, and configure R6 to perform summarization for Level 2 routers.

C. Configure R3 and R5 to perform summarization for Level 1 and Level 2 routers.

D. Configure R6 only to perform summarization for all routers.

正确答案：B

问题 #8

Refer to the exhibit. Refer to the exhibit. Company X is multihomed to a service provider. With the default settings, the link between PE2 and CE1 is the primary link, but company X has asked for the link between PE4 and CE2 to operate as the primary instead. A network engineer used a route map with local-preference to manipulate the routes from PE2 to CE1 to be less desirable and applied the route map on PE2 outbound to CE1. However, the path from PE2 to CE1 is still preferred. Which action must the engin

A. Apply local-preference on PE2 outbound to CE2 with a value less than 100.

B. Configure the AS path prepend attribute to increase the number of hops between CE2 and PE4.

C. Configure the weight attribute on PE2 in the outbound direction to CE2 with a value less than 65535.

D. Apply MED in the outbound direction on PE2 to CE1 with a cost lower than the path from PE4 to CE2.

正确答案：B

问题 #9

Which tree does multicast traffic follow?

A. shared tree

B. MDT default

C. source tree

D. MDT voice

正确答案：B

问题 #10

A network operator is getting the route for 10.11.11 0/24 from two upstream providers on #XR3. The network operator must configure #XR3 to force the 10.11.11.0/24 prefix to route via next hop of 10.0.0.9 as primary when available. Which of these can the operator use the routing policy language for, to enforce this traffic forwarding path?

A. weight of 0 on the prefix coming from 192.168.0.2

B. lower local preference on the prefix coming from 192.168.0.2

C. higher local preference on the prefix coming from 192.168.0.1

D. weight of 100 on the prefix coming from 192.168.0.1

正确答案：C

问题 #11

The ISP_A network is configured with PIMv2 with sparse mode. The engineering team at ISP_A must implement multicast support following RFC 5059 in the network. The RP priority will be 0, and the solution must require limited supervision from the operations team. Which action must the team take to meet the requirements?

A. Implement Auto-RP on the candidate RP and the mapping agent only.

B. Implement Static RP across all routers in the network.

C. Implement bootstrap router in the network core.

D. Implement Anycast-RP on edge routers only.

正确答案：C

问题 #12

Router 1 has established an SR-TE tunnel with router 2. Which statement describes this configuration?

A. Router 1 has a list of labels used to explicitly lay out a path to router 2.

B. Router 1 and router 2 have a bidirectional tunnel set up with dynamic path selection.

C. Router 1 is the head-end tunnel and has dynamically chosen a path to router 2.

D. Router 2 is the head-end tunnel and has explicitly set a path to router 1.

正确答案：D

问题 #13

Router 1 is a core ABR in a Cisco Unified MPLS environment. All of the router 1 BGP peers are established, but traffic between customers is failing. Which BGP configuration must be added to the configuration?

A. It must be configured for graceful restart

B. It must be configured with a route reflector

C. It must be configured with send labels

D. It must be configured with PIC edge

正确答案：B

问题 #14

Refer to the exhibit. Which attribute can router 1 alter so that only other iBGP peers prefer to use 192.168.4.2 as the nexthop for route 192.168.3.0/24?

A. MED

B. local preference

C. origin

D. weight

正确答案：A

问题 #15

A network operator is working to filter routes from being advertised that are covered under an aggregate announcement. The receiving router of the aggregate announcement block is still getting some of the more specific routes plus the aggregate. Which configuration change ensures that only the aggregate is announced now and in the future if other networks are to be added?

A. Configure the summary-only keyword on the aggregate command

B. Set each specific route in the AGGRO policy to drop instead of suppress-route

C. Filter the routes on the receiving router

D. Set each specific route in the AGGRO policy to remove instead of suppress-route

正确答案：A

问题 #16

Which effect of this configuration is true?

A. It sets the keepalive timer to 30 seconds and the hold timer to 240 seconds.

B. It sets the keepalive timer to 30 milliseconds and the hold timer to 240 millisecondsC. It sets the hold timer to 30 milliseconds and the keepalive timer to 240 milliseconds

D. It sets the hold timer to 30 seconds and the keepalive timer to 240 seconds

正确答案：A

问题 #17

Which LSA type is indicated by this router output?

A. type 3 LSA

B. type 4 LSA

C. type 1 LSA

D. type 2 LSA

正确答案：A

问题 #18

For which reason can two devices fail to establish an OSPF neighbor relationship?

A. The two devices have different process IDs

B. The two devices have different network types

C. The two devices have different router IDs

D. The two devices have the same area ID

正确答案：B

问题 #19

After you applied these configurations to routers R1 and R2, the two devices could not form a neighbor relationship. Which reason for the problem is the most likely?

A. The two routers cannot authenticate with one another.

B. The two routers have the same area ID.

C. The two routers have the same network ID.

D. The two routers have different IS-types.

正确答案：C

问题 #20

Refer to the exhibit. What is the relationship between Router 1 and Router 2?

A. Router 1 centrally learns the topology of the network to aid in SR-TE path selection, and Router 2 is a node that feeds Router 1 topology information

B. Router 1 and Router 2 are participating in SR-TE tunnels and are both head-end routers

C. Router 1 and Router 2 centrally learn the topology of the network to aid in SR-TE path selection for peers

D. Router 2 is the head-end router in an SR-TE tunnel, and it is learning topology of the network from the PCE enabled on Router 1

正确答案：D

问题 #21

What is the function of BGP confederations?

A. They require routers to use private AS numbers.

B. They eliminate the need for a fully-meshed internal BGP design.

C. They enable a single device to distribute a common configuration to its peers.

D. They assign an external BGP router to serve as the route reflector.

正确答案：B

查看更多题库 »