« 返回题库列表为 CCNP 300-415 考试做好准备，获取相关试题及学习资料。关于 Cisco SD-WAN 解决方案的相关内容，请参阅 SPOTO。
通过我们的全面学习资料和历年历年真题，为参加300-415 Cisco SD-WAN解决方案相关的考试做好准备。 我们的考试备考资源包括练习测试、模拟考试，以及包含数百道独特试题的考试题库。这些试题涵盖了SD-WAN架构、控制器部署、边缘路由器配置以及策略管理等方面的内容。 定期使用我们的模拟考试系统进行练习，可以帮助你发现自己的知识短板，从而更有针对性地进行学习。 可以查看详细的考试答案和解析，以帮助您更好地理解所学内容。 我们的免费测试资源包括历年真题和答案，以及相关的考试材料。这些资源都经过精心制作，以确保您能够充分准备参加CCNP Enterprise以及Cisco Certified Specialist – Enterprise SD-WAN Implementation认证考试。 使用我们高质量的考试练习工具，最大限度地提高您的备考效果。
问题 #1
In which circumstance does the BGP neighbor remain in the idle condition?
A. if prefixes are not received from the BGP peer
B. if prefixes reach the maximum limit
C. if a prefix list is applied on the inbound direction
D. if prefixes exceed the maximum limit
问题 #2
What is a prerequisite for configuring BFD?
A. Jumbo frame support must be configured on the router that is using BFD.
B. All routers in the path between two BFD endpoints must have BFD enabled.
C. Cisco Express Forwarding must be enabled on all participating BFD endpoints.
D. To use BFD with BGP, the timers 3 9 command must first be configured in the BGP routing process.
问题 #3
Users in the branch network of 2001:db8:0:4::/64 report that they cannot access the Internet. Which command is issued in IPv6 router EIGRP 100 configuration mode to solve this issue?
A. Issue the eigrp stub command on R1.
B. Issue the no eigrp stub command on R1.
C. Issue the eigrp stub command on R2.
D. Issue the no eigrp stub command on R2.
问题 #4
Which subnet is redistributed from EIGRP to OSPF routing protocols?
A. 10.2.2.0/24
B. 10.1.4.0/26
C. 10.1.2.0/24
D. 10.2.3.0/26
问题 #5
Which statement about MPLS LDP router ID is true?
A. If not configured, the operational physical interface is chosen as the router ID even if a loopback is configured.
B. The loopback with the highest IP address is selected as the router ID.
C. The MPLS LDP router ID must match the IGP router ID.
D. The force keyword changes the router ID to the specified address without causing any impact.
问题 #6
An engineer configured the wrong default gateway for the Cisco DNA Center enterprise interface during the install. Which command must the engineer run to correct the configuration?
A. sudo maglev-config update
B. sudo maglev install config update
C. sudo maglev reinstall
D. sudo update config install
问题 #7
Drag and drop the packet types from the left onto the correct descriptions on the right.
A. Mastered
B. Not Mastered
问题 #8
An administrator that is connected to the console does not see debug messages when remote users log in. Which action ensures that debug messages are displayed for remote logins?
A. Enter the transport input ssh configuration command.
B. Enter the terminal monitor exec command.
C. Enter the logging console debugging configuration command.
D. Enter the aaa new-model configuration command.
问题 #9
An engineer is troubleshooting BGP on a device but discovers that the clock on the device does not correspond to the time stamp of the log entries. Which action ensures consistency between the two times?
A. Configure the service timestamps log uptime command in global configuration mode.
B. Configure the logging clock synchronize command in global configuration mode.
C. Configure the service timestamps log datetime localtime command in global configuration mode.
D. Make sure that the clock on the device is synchronized with an NTP server.
问题 #10
Drag and drop the MPLS VPN concepts from the left onto the correct descriptions on the right.
A. Mastered
B. Not Mastered
问题 #11
When provisioning a device in
Cisco DNA Center, the engineer sees the error message “Cannot select the device. Not compatible with template”. What is the reason for the error?
A. The template has an incorrect configuration.
B. The software version of the template is different from the software version of the device.
C. The changes to the template were not committed.
D. The tag that was used to filter the templates does not match the device tag.
闽公网安备 35012102500533号
|
闽ICP备18010967号-7