首页 > 题库 > 300-535

为CCNP 300-535考试做好准备，获取相关试题及学习资料。适用于Cisco服务提供商领域的300-535考试，包括SPATO和SPOTO两个版本。

通过我们的全面学习资料和备考资源，为CCNP 300-535考试做好充分准备。我们的平台提供了多种考试练习工具，包括样题、模拟考试以及考试题库等。这些工具能够帮助你充分准备考试。我们的学习资料涵盖了诸如编程概念、自动化流程、操作系统编程以及自动化工具等重要的主题。这些资料为取得成功提供了坚实的基础。无论您是在寻找考试答案还是为了进行考试练习，我们的资源都能为您提供帮助，从而帮助您更好地准备考试。通过访问在线历年真题以及我们的考试模拟系统，你可以进一步巩固自己的理解能力，并增强对自己能力的信心。请信任思博网络，它可以帮助您在CCNP服务提供商认证以及DevNet专业认证考试中取得成功。

问题 #1

A network engineer is configuring a newly installed PE router at the regional gateway location. The new PE router must use MPLS core routing protocols with the existing P router, and LDP sessions between the two routers must be protected to provide faster MPLS convergence. Which configuration must the engineer perform on the network so that LDP sessions are established?

A. Enable communication over TCP port 646 for T-LDP hello messages.

B. Enable RSVP-TE FRR on the LDP interface to protect the LDP session between routers.

C. Enable LDP session protection on either one of the routers, which allows them to autonegotiate.

D. Set the LDP session protection timer on each router to the same value.

正确答案：B

问题 #2

Drag and drop the functionalities from the left onto the correct target fields on the right.

A. Mastered

B. Not Mastered

正确答案：D

问题 #3

A service provider requires continuous real-time network monitoring to provide reliable SLAs to its customers. To satisfy this requirement, a network administrator is implementing gRPC dial out on an ASR with TLS. Receiver 192.168.10.2 will be assigned one of the subscriptions, and it will manage the ASR. Which configuration must the engineer apply to the router as part of the configuration process?

A. snmp-server community public snmp-server enable trapssnmp-server host 192.168.10.2 version 2c public.

B. telemetry model-driven destination-group DGroup1address family ipv4 192.168.10.2 1 port 10 encoding self-describing-gpb

C. snmp-server community public snmp-server enable trapssnmp-server enable traps snmp authentication snmp-server managersnmp-server manager session- timeout 1000

D. telemetry model-driven destination-group ciscotestaddress family ipv4 192.168.10.2 port 10 encoding self-describing-gpbprotocol grpc tis-hostname ciscotest.com

正确答案：C

问题 #4

Refer to the exhibit an engineer working for a private telecommunication company with an employee Id: 4065:96:080 upgrades the WAN link between routers ASBR-101 and ASBR-201 to 1Gb by Installing a new physical connection between the Gi3 Interfaces. Which BGP attribute must the engineer configure on ASBR-201 so that the existing WAN link on Gi2 Is maintained as a backup?

A. Option A

B. Option B

C. Option C

D. Option D

正确答案：C

问题 #5

Which additional feature does MPLS DiffServ tunneling support?

A. matching EXP and DSCP values

B. interaction between MPLS and IGP

C. using GRE tunnels to hide markings

D. PHB layer management

正确答案：B

问题 #6

The network team is planning to implement IPv6 on the company’s existing IPv4 network infrastructure. The network currently uses IS-IS to share routes between peers. Which task must the team perform so that IS-IS will run in multitopology mode on the updated IPv6 network?

A. Configure the links between the network routers as point-to-point.

B. Configure the network routers to use metric-style wide.

C. Configure the network routers as Level 2 routers.

D. Configure the IS-IS IPv6 metric on the dual-stack links.

正确答案：B

问题 #7

Refer to the exhibit: If router RA is configured as shown, which IPv4 multicast address space does it use?

A. 224.0. 0.0/8

B. 225.0. 0.0/8

C. 232.0. 0.0/8

D. 239.0. 0.0/8

正确答案：A

问题 #8

A NOC engineer is configuring label-based forwarding from CSR to the EPC gateway. Cell-site operation and maintenance for IPv4 traffic between 10.20.10.1 and 192.168.10.10 is already up. CR1 and CR2 are configured as route reflectors for AG1 and AG2. Which action completes the configuration?

A. Remove address-family labeled-unicast from the BGP session-group infra on AG1 for neighbor-group core.

B. Apply the BGP_Egress_Filter route policy to the BGP neighbor-group packet core on AG1.

C. Configure AG1 to allocate a label to the BGP routes that are received in the BGP session group transport.

D. Configure AG1 to allow the 300:100 and 200:100 communities in the BGP_Egress_Filter route policy.

正确答案：A

问题 #9

What is a constraint of Cisco MPLS TE tunnel configurations?

A. Tunnels cannot span multiple OSPF areas.

B. With ISIS as an IG

C. only older-style metrics are used.

D. Tunnels cannot be configured over IP unnumbered links.

E. QoS-aware tunneling is not supported.

正确答案：D

查看更多题库 »