首页 > 题库 > 300-835

为通过 CCNP 300-835 考试做好准备：2026年更新的历年真题。包括 CCNP 300-835 的 CLAUTO 和 SPOTO 相关内容。

为了确保2026年更新的CCNP考试能够取得成功，我们需要采取一些措施。300-835参加CLAUTO考试时，认真准备并多做高质量的模拟试题是非常重要的。定期参加模拟考试，使用最新的样题来检测自己的薄弱环节，从而提升自己的能力。使用最新的考试资料也是非常重要的。丢弃/删除通过准确的历年真题和答案，可以真实地评估你的备考情况。能够模拟真实考试环境的考试模拟器对于提高考生的应试能力来说非常有价值。请加入更多内容吧。在线历年真题、涵盖编程概念以及Cisco协作技术的学习资料，还有免费的测试题库，都可以被纳入你的学习计划中。持续的、有针对性的练习，再加上充分的准备资源，才是掌握考试内容、顺利通过这一具有挑战性的认证考试的关键。

问题 #1

Router 1 is missing the route for the router 2 loopback 0. What should the engineer change to fix the problem?

A. the area numbers on Router 1 and Router 2 to be similar

B. the wildcard mask network statement in OSPF of Router 2

C. Router 1 to be an ABR

D. the hello timers on Router 1 and Router 2 to be different

正确答案：A

问题 #2

Refer to the exhibits. R1 and R2 are directly connected and IS-IS routing has been enabled between R1 and R2. R1 generates the above log message periodically. Based on this output, which statement is true?

A. IS-IS neighbor authentication is failing for Level 2 PDUs only.

B. IS-IS neighbor authentication is failing for Level 2 first and then for Level 1 PDUs.

C. IS-IS neighbor authentication is failing for Level 1 and Level 2 PDUs.

D. IS-IS neighbor authentication is failing for Level 1 PDUs only.

正确答案：AB

问题 #3

When configuring traffic engineering tunnels in Cisco MPLS core network, you see the traffic is not tacking the expected path in the core. Which command do you use to quickly check path of a TE tunnel?

A. traceroute

B. show mpls traffic-engineering tunnels

C. Ping

D. traceroute mpls ipv4

正确答案：A

问题 #4

Refer to the exhibit. This configuration is being applied on an IOS XR route. Which statement about this configuration is true?

A. It is used to create a sensor-group and has a list of YANG models for streaming.

B. It is used to create a subscription to specify the streaming interval.

C. It is used to identify MIB entries and has a list of YANG models.

D. It is used to identify traps for SNMP polling.

正确答案：B

问题 #5

A network engineer is implementing NetFlow to observe traffic patterns on the network. The engineer is planning to review the patterns to help plan future strategies for monitoring and preventing congestion as the network grows. If the captures must include BGP next-hop flows, which configuration must the engineer apply to the router?

A. ip cefip flow-export version 5 bgp-nexthopip flow-export destination 192.168.1.1 9995 interface gigabitethernet 1/0/1ip flow egress

B. ip cefip flow-export version 9 bgp-nexthopip flow-export destination 192.168.1.1 9996 interface gigabitethernet 1/0/1ip flow ingress

C. ip cefip flow-export version 5ip flow-export destination 192.168.1.1 9995 interface gigabitethernet 1/0/1ip flow ingress cdp enable

D. no ip cefip flow-export version 9ip flow-export destination 192.168.1.1 9996 interface gigabitethernet 1/0/1ip flow ingressip flow egress

正确答案：B

问题 #6

Router 4 is added to the network and must be in the same area as router 1. Which NET should the engineer assign?

A. 49.0001.0000.0000.0004.00

B. 49.0111.0000.0000.0001.00

C. 49.0011.0000.0000.0003.00

D. 49.0011.0000.0000.0002.00

正确答案：C

问题 #7

Which task must be performed first to implement BFD in an IS-IS environment?

A. Configure BFD in an interface configuration mode.

B. Disable Cisco Express Forwarding on all interfaces running routing protocols other than IS-IS.

C. Configure all IS-IS routers as Level 2 devices.

D. Configure BFD under the IS-IS process.

正确答案：D

查看更多题库 »