« 返回题库列表CCNP 300-425历年真题与模拟测试，思科企业无线网络技术 | 思博网络
通过我们为Cisco企业无线网络量身定制的、包含大量历年真题的综合题库以及模拟测试，您可以解锁CCNP 300-425考试的成功秘诀。 我们的考试资料涵盖了诸如现场勘测、有线和无线基础设施、移动性以及WLAN的高可用性等重要主题。这些资料有助于考生充分准备考试。 您可以尝试使用我们的模拟考试来模拟真实的考试情境，从而有效提升自己的技能水平。 请利用我们提供的详细考试答案，来加深您对关键概念的理解。 借助 思博网络 提供的优质资源，包括样题和模拟历年真题等，您可以更好地进行备考，从而提升自己的信心。 从今天开始，踏上通往成功的旅程吧！获得备受认可的Cisco认证专家——企业无线设计认证吧。 使用我们的考试练习资料，高效地准备考试，从而充分发挥你的潜力，取得优异的考试成绩。
问题 #1
What are two outcomes reflected in the Web App Health application? (Choose two.)
A. Users on both networks may be experiencing issues when attempting to reach Google.
B. Network #1 could not load Google because of a remote server issue.
C. Network #2 had better application performance than Network #1.
D. Network #2 could not load Google because of a local client misconfiguration.
E. Neither network recorded any server-side performance issues.
问题 #2
Which Cisco Meraki product must be deployed in addition to Systems Manager so that Systems Manager Sentry enrollment can be used?
A. MS Switch
B. Meraki Insight
C. MR Access Point
D. MV Smart Camera
问题 #3
Which IDS/IPS mode is the MX Security Appliance configured for?
A. quarantine
B. prevention
C. detection
D. blocking
问题 #4
What are the Loss and Average Latency statistics based on?
A. responses that the MX appliance receives on the connectivity-testing hostnames on the Insight > Web App Health page
B. responses that the MX appliance receives on the connectivity-testing IP addresses on the Security & SD-WAN > Firewall page
C. responses that the MX appliance receives on the connectivity-testing IP address that is configured on the Security & SD-WAN > SD-WAN & Traffic Shaping pageD. responses that the MX appliance receives on the connectivity-testing IP addresses on the Help > Firewall info page
问题 #5
During a Meraki AP deployment, the default SSID that the exhibit shows is broadcast. What causes this behavior?
A. An AP does not have a wired connection to the network.
B. An AP cannot connect to the default gateway.
C. An AP has never connected to the Meraki Cloud Controller.
D. An AP has Site Survey mode enabled.
问题 #6
A Cisco Meraki MV camera is monitoring an office and its field of vision currently captures work desks and employee computer screens. However, recording employee computer screens is prohibited by local regulation. Which feature in Dashboard can be used to preserve the current position of the camera while also meeting regulation requirements?
A. zone exclusion
B. privacy window
C. area or interest
D. sensor crop
E. restricted mode
问题 #7
What is the minimal Cisco Meraki Insight licensing requirement?
A. A single Meraki Insight license must be configured on network A to gain Web App Health visibility on network
B. B. A single Meraki Insight license must be configured on network B to gain Web App Health visibility on network
B.
C. A single Meraki Insight license must be configured on network A, and a single license must be configured on network B, to gain Web App Health visibility on network
B.
D. Two Meraki Insight licenses must be configured on network A to gain Web App Health visibility on network
B.
E. Two Meraki Insight licenses must be configured on network A and a single license must be configured on network B, to gain Web App Health visibility on network
B.
问题 #8
A packet arrives on the VPN concentrator with source IP 10.168.70.3 and destined for IP 10.116.32.4. What is the next hop for the packet, based on this concentrator routing table?
A. The concentrator gateway (10.128.124.62) is the next hop.
B. Not enough detail is available to determine the next hop.
C. The packet is stopped.
D. The Auto VPN peer “Store 1532 – appliance” is the next hop.
问题 #9
Which two Systems Manager Live tools are available only for Apple Macs and Windows PCs and cannot be used on iOS or Android mobile devices? (Choose two.)
A. OS updates
B. Send notification
C. Selective wipe
D. Screenshot
E. Remote Desktop
问题 #10
What is an advantage of implementing inter-VLAN routing on an MX Security Appliance rather than performing inter-VLAN routing on an MS Series Switch?
A. The MX appliance performs IDS/IPS for inter-VLAN traffic.
B. The MX appliance performs AMP for inter-VLAN traffic.
C. The MX appliance performs data encryption for inter-VLAN traffic.
D. The MX appliance performs content filtering for inter-VLAN traffic.
问题 #11
What does the MX Security Appliance send to determine whether VPN traffic exceeds the configured latency threshold in the VoIP custom performance class?
A. 1000-byte TCP probes every second, through VPN tunnels that are established over the primary WAN link.
B. 100-byte UDP probes every second, through VPN tunnels that are established over every WAN link.
C. 100-byte UDP probes every second, through VPN tunnels that are established over the primary WAN link.
D. 1000-byte TCP probes every second, through VPN tunnels that are established over every WAN link.
问题 #12
When an SSID is configured with Sign-On Splash page enabled, which two settings must be configured for unauthenticated clients to have full network access and not be allow listed? (Choose two.)
A. Controller disconnection behavior
B. Captive Portal strength
C. Simultaneous logins
D. Firewall & traffic shaping
E. RADIUS for splash page settings
问题 #13
For an AP that displays this alert, which network access control method must be in use?
A. preshared key
B. WPA2-enterprise with my RADIUS server
C. splash page with my RADIUS server
D. MAC-based access control with RADIUS server
问题 #14
Which configuration step is necessary when automatic updating is required of iOS apps provisioned through Systems Manager that are found in the App Store?
A. No configuration step is necessary; automatic updating is the default behavior.
B. Configure automatic updating of iOS devices in the Meraki installed profile.
C. Create a security policy that enables automatic updates.
D. Create a profile with automatic update enabled and apply it to iOS devices.
问题 #15
Assuming this MX has established a full tunnel with its VPN peer, how will the MX route the WebEx traffic?
A. WebEx traffic will prefer WAN 2 as long as it meets the thresholds in the “Conf” performance class.
B. WebEx traffic will prefer WAN 1 as it is the primary uplink.
C. WebEx traffic will prefer WAN 2 as long as it is up.
D. WebEx traffic will be load-balanced between both active WAN links.
问题 #16
When wireless SSIDs are configured in Dashboard, which setting on the Access Control page affects the ability of a 2.4 GHz only client device from associating to the WLAN for the first time?
A. Content filtering
B. Bridge mode
C. 802.11r
D. Dual band operating with Band Steering
问题 #17
Which design recommendation should be considered?
A. A 25-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 1-hop maximum.
B. A 25-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 2-hop maximum.
C. A 50-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 1-hop maximum.
D. A 50-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 2-hop maximum.
问题 #18
Which two actions are required to optimize load balancing asymmetrically with a 4:1 ratio between links? (Choose two.)
A. Change the primary uplink to "none".
B. Add an internet traffic preference that defines the load-balancing ratio as 4:1.
C. Enable load balancing.
D. Set the speed of the cellular uplink to zero.
E. Change the assigned speeds of WAN 1 and WAN 2 so that the ratio is 4:1.
问题 #19
A customer requires a hub-and-spoke Auto VPN deployment with two NAT-mode hubs with dual uplink connections and 50 remote sites with a single uplink connection. How many tunnels does each hub need to support?
问题 #20
This Dashboard organization uses Co-Termination licensing model. What happens when an additional seven APs are claimed on this network without adding licenses?
A. All APs immediately stop functioning.
B. All network devices stop functioning in 30 days.
C. One AP Immediately stops functioning.
D. All APs stop functioning in 30 days.
闽公网安备 35012102500533号
|
闽ICP备18010967号-7