首页 > 题库 > 300-835

通过CCNP 300-835的练习题，您可以轻松获得成功。CCNP 300-835 CLAUTO | 思博网络也是很好的学习资源。

要在具有挑战性的 CCNP 300-835 CLAUTO 考试中取得成功，就需要采取一种以高质量练习测试以及备考资源为核心的策略。定期参加模拟考试和练习题，以发现自己的知识短板，并提升自己在编程概念、API接口、自动化协议以及Cisco协作解决方案等关键领域的技能。使用最新的考试题库，其中包含真实的历年真题及其解析，以此来准确评估自己的备考水平。能够模拟真实考试环境的考试模拟器，对于提升考生的自信心和耐力来说，具有非常宝贵的帮助。在您的备考计划中，加入更多的学习资料、在线历年真题、免费的测试题库以及其他用于练习的考试资源。持续使用各种高质量的材料进行练习，是掌握这些测试目标、从而在如此具有挑战性的认证考试中取得成功的关键。

问题 #1

A request to activate the port security database is rejected. Which action do you perform to investigate the cause of the issue?

A. Enable the auto-learning feature.

B. Use the force option to identify rejected devices.

C. Find conflicting entries between the active and configuration databases.

D. Verify that devices are fully attached to the active database.

正确答案：A

问题 #2

After a failover occurs, which two actions must be performed on Switch-B to manually preempt the operational primary role back to Switch-A? (Choose two.)

A. Configure the local vPC role priority to have a lower value than Switch-A.

A. Configure the local vPC role priority to have a higher value than Switch-A.

B. Disable and then re-enable the vPC peer-keepalive link.

C. Configure the local vPC role priority to have the same value as Switch-A.

D. Disable and then re-enable the vPC peer link.

正确答案：BE

问题 #3

A vPC Type-1 inconsistency between two vPC peers in a VXLAN EVPN setup is discovered. Which two actions need to be attempted to resolve the issue? (Choose two.)

A. Configure the NVE interfaces to be Up on both switches.

B. Set a different distributed gateway virtual MAC address.

C. Set a different secondary IP addresses on NVE source-interface.

D. Configure the same VNI to multicast group maping.

E. Set a different primary IP addresses on NVE source-interface.

正确答案：AD

问题 #4

An engineer is troubleshooting a custom AV pair that was created by a client on an external authentication server to map a read-only role for a specific security domain. Which AV pair solves the problem?

A. shell:domains=Security_Domain_1//Read_Role_1|Read_Role_2

B. shell:domains=Security_Domain_1/Write_Role_1|Read_Role_2

C. shell=Security_Domain_1/Read_Role_1|Read_Role_2

D. shell:domains=Security_Domain_1/Read_Role_1|Read_Role_2

正确答案：C

问题 #5

You have an ACI environment with three APICs, two spine switches, and four-leaf switches. You wipe and reboot all APICs first then leaf and spine switches one- by-one and successfully go through the Initial Setuo dialogue on the APIC 1 CIMC KVM console. When you log in to the APIC1 WebGUI, you notice that you do not see any directly connected leaf switches being discovered under Fabric > Inventory > Fabric Membership. What is the cause of the issue?

A. The leaf nodes were not erased properly, which caused a fabric parameters mismatch with the APIC1.

B. Rebooting the APICs and the leaf and spine switches after wiping them is not required.

C. You forgot to enter the TEP Pool value during the Initial Setup dialogue on APIC1.

D. The same Fabric Name value should be used before after wiping all devices.

正确答案：C

问题 #6

After the configuration is performed, guestshell continues to use 2%CPU. Which action resolves the issue?

A. Resync the database

B. Recreate the guestshell

C. Reboot the guestshell

D. Reboot the switch

正确答案：A

问题 #7

Cisco Unified Computing System Manager raises a critical error message that indicates that the system has overlapping Ethernet and FCoE VLANs. All of the Ethernet traffic on the overlapping VLANs drops. Which action resolves the issue?

A. Modify the VLAN assignment to vNICs.

B. Change the PIN groups on the vHBAs.

C. Modify the FCoE VLAN.

D. Set the FCoE VLAN as the native VLAN on server uplinks.

正确答案：A

问题 #8

HSRP adjacency fails to form between Nexus7K-1 and Nexus7K-2. Which action should be taken to solve the problem?

A. Configure preempt on one of the switches in the HSRP group.

B. Configure the same HSRP priority between the two switches.

C. Configure the correct subnet mask on Nexus7K-1.

D. Configure HSRP version 2 on Nexus7K-2.

正确答案：D

问题 #9

DRAG DROP Drag and drop the commands from the left onto the correct categories on the right. Select and Place:

A. Mastered

B. Not Mastered

正确答案：A

查看更多题库 »